Racor Diesel Engine Filter Assembly (RAC230R2)

Racor Diesel Engine Filter Assembly Introduction The Racor diesel spin-on 200 Series features a variety of compact sizes to fit in the most cramped engine compartments. All models are standard with 1/4”-18 NPTF (SAE J476) inlet and outlet fuel ports (14M ports also available) and a unitized mounting bracket. They also include an in-head primer pump which allows the operator to hand prime the filter and simplifies service procedures. All 200 Series filters feature spin-on, high capacity, Aquabloc®II replaceable filter elements which separate water, remove solid contamination, and are available in 2, 10, and 30 micron. Filtration needs should be based on application, fuel quality, operating climates and maintenance schedules. All models also have a spin-on contaminant collection bowl. The see through bowls used with these models will not discolor from alcohol, additives, or UV light and have a leak-proof, positive seal, self-venting drain for easy servicing. Water and contamination levels can be seen easily at a glance. Options for the 200 Series filters include: water detection kits (for diesel applications only), vacuum or compound gauges, 12 or 24 volt dc (200 watt) heaters, hose and fittings, and metal bowls. Metal bowls should be specified when filtering fuels in hazardous locations where equipment is exposed to flying gravel and debris. Maximum flow rate : 30 gph Flow: 114 lph Diesel Max PSI: 30 PSI Height - 229mm Width - 102mm Depth - 102mm Element for this is RACR20 in 2 micron, 10 micron, or 30 micron