PROPELLER GUARD- ORANGE - Interior Diam. 11" - GUA011171 - REC25-35/GUA011171

25 - 35 hp
Orange, Interior Diam. 11"
 

CLICK ON PICTURE FOR PROP GUARD MEASUREMENT GUIDE-

9 - XP Prop Guard (safety white) fits 5hp to 9hp

9"- Prop Guard (safety Yellow) fits 9.9hp to 20hp.
 (except bigfoot & high Thrust, require 11")

11" Prop Guard (safety orange) fits 25hp to 35hp.
(except bigfoot & High Thrust, require 13")

13" Prop Guard (safety Blue) fits 40hp to 65hp.
(except Bigfoot & High Thrust, require 14")

14" Prop Guard (Safety Red) fits 70hp to 100hp.
(except Big Foot & High Thrust, require 16")

16" Prop Guard (safety White) fits 110hp to 350hp.
(All Stern Drives & Volvo Dual).

Prop Guards will fit all Maufacturers Outboards and stern drives.
(please note- All Hp's with Bigfoot and High Thrust applications require next size up)

ALL APPLICATIONS OF 13" AND 14" PROP GUARDS ARE FOR PONTOON AND DECK BOATS, AND ANY OTHER APPLICATION THAT THE VESSEL DOES NOT EXCEED 25mph.

To obtain optimal performance from your motor with the Prop Guard Fitted, you may need to change your propeller diameter; for a 9" Prop guard go up to a 8.5", prop.
For 11" prop guard the propeller diameter should go up to 10.5".
For 14" prop guard, the propeller diameter should go up to 13.5" prop
For 16" prop guard, the propeller diameter should go up to 16" prop.

The Closer the prop blades are to the Prop guard rings, it will optimize your performance, and will not create a drag. Your motor will also have to be trimmed to a setting of optimal performance.

BE SURE THE PROP GUARD YOU PURCHASE IS THE CORRECT SIZE, BEFORE YOU FIT  IT ON YOUR MOTOR,
PLACE IT ON YOUR MOTOR WITH GRIP CLAMPS FIRST AND CHECK YOUR CLEARANCES BEFORE DRILLING AND MOUNTING.
IF A PROP GUARD HAS BEEN DRILLED, WE CANNOT ACCEPT IT BACK., BECAUSE OF WRONG SIZE ORDERED.